For your facility
The cycle runs after consulting hours, when the consulting room is empty. Equipment stays where it is, nothing is covered, and the air left in the room after patients is treated too.
What you gain
Three things that manual disinfection cannot provide on its own.
01
Part of the contamination left by patients remains in the air, not on surfaces, and wiping does not capture it. The fog acts on the air and on surfaces at the same time, including spots behind equipment and the chair.
02
You start the cycle with a button as you leave, or it starts by itself on a set schedule. It takes 20 minutes, needs no supervision or ventilation, and nobody has to stay at work longer.
03
Date, time and room are shown on the unit's display; an archived history is available from the Professional level upwards. You look after the cleanliness of your environment with an automated system whose efficacy was measured on a university hospital ward. The results were published in a peer-reviewed journal.
Scope
MEDIfogg is a permanently installed system, and the smallest possible scope is one section, i.e. one consulting room or procedure room. The installation consists of piping, nozzles and a control unit located outside the treated room.
01
It is not a mobile device that takes up space and has to be stored away. The piping and nozzles are part of the room, so nothing needs to be put away or carried out.
02
The cycle is started with a button or automatically on a set schedule after the practice closes.
03
Stabilised hydrogen peroxide 7.7% with ionised silver (Ag⁺) and a five-minute application within a 20-minute cycle. Disinfection performance is the same at every level; the installation scope determines the number of rooms treated.
Which level
For an outpatient practice, what matters is reliable operation and a start that nobody has to think about. Both are provided by the Core and Control levels.
Level 1
Manual start,
full disinfection performance
The cycle is started with a button when leaving the practice. Notifications about product refilling and servicing are sent via GSM, just as at the higher levels.
Features of this levelLevel 2 · most common choice
Automatic control
to a schedule
Once the time is set, the cycle starts automatically after consulting hours, independently of staff.
Features of this levelSafety and your equipment
In a consulting room, equipment is placed close together and cannot be moved. Dry fog reaches it without anything having to be moved.
01
The droplets do not merge into larger drops on surfaces, so surfaces stay dry and water does not seep into equipment or sockets. We will confirm the material compatibility of your specific equipment during the site survey.
02
Equipment and the chair stay where they are. The fog also treats the surfaces behind them, which cannot be reached with manual disinfection.
03
Hydrogen peroxide breaks down into water and oxygen. No toxic residues or odour remain, and no ventilation is needed.
First step
Site survey of your practice
We measure the room and propose the number of nozzles and the piping route. During the survey, we will tell you whether the solution makes economic sense for your practice.
Sales Director and Project Manager, Detectair Technologies
What interests you most about MEDIfogg®?
Choose the topics that matter most to you and we will get back to you with exactly what you are interested in.
